Detailed introduction of software functions

Easy to learn, easy to understand, and easy to use. This is the most suitable machining software for machining industry. There is no need to memorize instructions while using the software.
Parametric processing data setting，only takes four steps to make CAM :1.Load STEP file 2.Specifies the plane to be machined 3.Set processing parameters 4.Transfer out processing NC code
Complete processing method Cycloid、Face Milling、Pocket、Contour、Drill、Tap、Reaming、Milling .
Positioning five-axis software lets programmers,quick and easy generation of NC programs for five-sided machining，shorten processing time.
Provides toolpath simulation、entity simulation、remnant display，calculate processing time.
Record each processed product, the tool and tool number required for processing, so that the operator of the machine can accurately use the corresponding tool.

When drilling, it can automatically capture the characteristics of the solid hole, including the hole diameter, upper Z value and lower Z value, without setting each hole separately.
Automatic corner clearing can automatically clear the corner residue left by the previous tool.
The edge chamfering method of the tool can be used to produce boundary chamfers that are not constructed on the STEP entity.
Intelligent tool lifting method, automatically lifts the tool according to the height of each working plane, reduces empty running and achieves the best processing efficiency.

The functions of the controller can be used in the software:1. The machine and the software can be simulated synchronously 2.Find the workpiece origin function 3.Set Work Coordinate System 4.Automatic tool measurement function
The software operation interface can be customized according to the needs of the machinery factory.

The two rotating axes first fix the workpiece at a position perpendicular to the tool axis, and then carry out the process by X, Y, and Z.processing.
Effective use of shorter tools, less tool stick-out, faster cutting, longer tool life, improved machining accuracy and surface finish can be achieved by simply creating a positioning machining plane. In addition, fewer processing steps are required for positioning five-axis machining, which saves time, reduces the error rate of tool machining, and improves the utilization rate of machine tools.
Click the plane to be processed to set the plane for multi-face machining. The movement and tilt of the plane allows you to process parts from different angles without changing the fixture. The direction of machining corresponds to the orientation of the tool. With the translation function of moving or tilting the plane, the programming time can be reduced.
Complicated part processing can be completed at one time, saving the cost of special fixtures, reducing the processing process and cost, and increasing production capacity.